CFP-100GBASE-SR10

Features

• Compliant to IEEE 802.3ba 100GBASE -SR10
• 10 independent full- duplex channels
• Up to 11.2Gbps per channel bandwidth  
• Aggregate bandwidth of > 100Gbps
• Form factors compliant to CFP MSA
• CAUI h igh  speed  electrical  i nterface  
• IEEE compliant MDIO interface for management and digital diagnostic  monitor
• Capable of over 100 m  transmission on high bandwidth 50µm multi- mode ribbon fiber   
• Single +3.3V p ower supply, operating case temperature: 0~70C
• All- metal housing for superior EMI performance
• RoHS compliant  
• No reference clock needed  
• TX input and RX output CDR retiming 

Applications

• Rack to rack
• Data centers
• Metro networks
• Switches and Routers

Transmitter Operation
The transceiver module receives 10  channels of 10Gbps electrical data , which are
processed by  a  10  channel Clock Data Recovery (CDR) IC   that reshapes and  reduces
the jitter  of each  electrical signal.  Subsequently , a VCSEL   laser driver I C converts each
channel of the 10   electrical  signals  to optical  signal from one of the 10 VCSEL  lasers .
All of 10   optical signals are  coupled to the MPO connector.
 
Receiver Operation   
The receiver section  receives optical input of 100 Gbp s  parallel  signal into 10  channel
10Gbp s  optical signals .  Each optical signal is converted to electrical signal by one
PIN/TIA.   All of the 10  electrical signals are feed to another  CDR IC   that  provides
limiting amplification, and reshapes and retimes  each  electrical signal  as one of the
1 0   output channels.